Contact Us: 954.427.0019
Discontinued – UPS Equipment Products

Discontinued – UPS Equipment Products

Buyers Guide

Buyer’s Guide

Whether your IT equipment is in an IDF room or a large data center, a UPS is an important part of your availability, disaster recovery, and business continuity plans. Need help selecting the right UPS? Our free guide will help identify your UPS needs, power requirements, and more. 

DISCONTINUED – Liebert Nfinity 4-20kVA

This product is discontinued.

DISCONTINUED – Liebert UP Station GXT

cf_discontinued

Congratulations on your choice of the Liebert UPStation GXT™ Uninterruptible Power System (UPS). It provides conditioned power to microcomputers and other sensitive electronic equipment.
Upon generation, AC power is clean and stable. However, during transmission and distribution it may be subject to voltage sags, spikes, or complete power failure which may interrupt computer operations, cause data loss, or even damage equipment. The UPStation GXT™ protects equipment from these disturbances.

The UPStation GXT™ comes in nominal power ratings of 700, 1000, 1500, 2000, or 3000 VA. The UPStation GXT™ is a compact, “on-line” UPS. An “on-line” UPS continuously conditions and regulates its output voltage, whether the utility power is present or not. It supplies connected equipment with clean sinewave power. Sensitive electronic equipment operates best from sinewave power.

For ease of use, the UPStation GXT™ contains a light emitting diode (LED) display to indicate either “load percentage” or “battery capacity” depending upon the mode of operation. It also provides self-diagnostics, a combination On/Alarm Silence/Manual Battery Test button, a combination Off/Bypass button, and two levels of alarms when the unit is operating on battery.
The UPStation GXT™ has an interface port for communications between the UPS and a LAN server or other computer system. This port provides detailed operating information including voltages, currents, and alarm status to the host system when used in conjunction with Liebert SiteNet® software. SiteNet® software can also remotely control UPS operation.

Liebert AP400

cf_discontinued

The Liebert AP400 Series true on-line uninterruptible power supply eliminates almost all power disturbances that can corrupt data and damage equipment. During a power failure, the AP400 will provide up to 15 minutes of battery back-up at full load, longer with additional battery cabinets or racks.

Liebert APM UPS

The row-based Liebert APM is a transformerless, on-line UPS that allows quick and easy capacity increases with modular power scalability – no additional floor space required. The UPS operates with high efficiency – up to 94% at loads of 50-100%.

cf_discontinued

Liebert CommSure Redundant UPS Interface

cf_discontinued

Liebert CommSure redundant UPS interface allows network managers to create their own high availability power system using existing UPS systems. The system eliminates false shutdown signals that occur when separate UPS systems are used to power computers with redundant power supplies. Liebert CommSure permits two Liebert UPS systems to function together as a redundant, high availability power system when used with computers with two or more power supplies. The unit assures that computers will continue to operate as long as power is available from one UPS or both. If power is unavailable from either UPS, Liebert CommSure, using Liebert MultiLink software, will automatically shut down your computers in an orderly manner. 50Hz or 60Hz.

Liebert FS Flywheel Energy Storage

An efficient and reliable alternative to standard battery systems used with a UPS. Liebert FS may be used as the sole back-up DC energy storage device or in conjunction with conventional battery strings and /or generator sets. Flywheels may be paralleled to provide for higher power requirements, longer runtimes, or for N+1 redundancy. This product is discontinued.

Liebert GXT2 On-Line UPS, 6kVA and 10kVA

cf_discontinued

Liebert GXT2 6- and 10-kVA UPS systems provide true on-line protection in the smallest cabinets in their capacity range. The UPS systems offer internal batteries, unlimited extended external batteries, and internal bypass capability, resulting in continuous uptime for the connected equipment. Multiple power output configurations allow quick connection of protected loads.

Designed for rack-mount or tower modes, Liebert GXT2 is available in a 6kVA, 4U model; and a 10kVA, 6U model. Both models are available with output of 120/208V, 220V, 230V, 240V. Dual output voltage units can provide 240/120, 208/120, 230/115, 220/110, or 200/100 VAC.

Liebert GXT2 6000 and 10000VA Power Assurance Package: This full coverage package includes all of the elements needed to ensure the highest level of protection for your electronic equipment: Liebert GXT2 UPS; Battery Kits; Startup 7×24; 5 Year Service Contract; (1) Preventative Maintenance Visit; On Site Service Support; 100% Parts Coverage, including Internal Batteries; 4 Hour Customer Response; 24 X 7 Emergency Service.

Liebert NX (10-30kVA)

cf_discontinued
Liebert NX is a mid-sized, three-phase uninterruptible power supply (UPS) system that delivers complete, centralized data center power protection. Designed to meet the high availability power needs of a wide variety of IT applications and equipment, the UPS combines compact size, advanced operating features and low cost of ownership. The 120/208-Volt, three-phase version of the Liebert NX is available in four sizes including 10kVA, 15kVA, 20kVA and 30kVA capacities.

Flexibility

  • Power communications available through a Relay Contact Card, OpenCommsâ„¢ Web Card and MultiLinkâ„¢ shutdown software.
  • Ultra-quiet performance with noise levels below 54dB allows greater latitude in where to place the unit.
  • Large and user-friendly LCD display provides operating information in twelve languages.
  • Up to three Liebert NX modules can be paralleled and a fourth added for redundancy without using a centralized controller or centralized static switch.
  • For safe and convenient servicing of the UPS, the unit includes a built-in maintenance bypass. Optional wrap-around maintenance bypass is also available.
  • Easy servicing due to front accessibility of critical components, self-diagnostics and various monitoring options.

Higher Availability

  • True on-line double conversion technology corrects all types of power fluctuations.
  • Advanced inverter control technology provides the highest output power quality.
  • Redundant power supply cords, redundant cooling fans and highly efficient cooling of critical components.
  • Minimized transfer to battery, reducing the number of charging and discharging cycles, due to the wider input voltage window of +10 to -20% and a frequency tolerance of 40Hz to 72Hz.
  • Compatibility with dual bus synchronization system enables you to transfer the load to an alternate power source for maintenance activities.
  • High overload protection handles 125% for 10 minutes, 150% for one minute and a 1000% overload for 10 milliseconds.
  • An intelligent battery management algorithm monitors the battery to detect any premature battery failure.

Lowest Total Cost Of Ownership

  • Temperature-compensated battery charging extends battery life.
  • Highest possible input power factor for maximum efficiency.
  • Adjustable power walk-in from 5 seconds to 30 seconds, along with reduced input current distortion and power factor correction, also enables you to save money by reducing back-up generator sizing requirements.
  • The unit’s compact footprint requires less floor space, leaving you with more room for other equipment.

Ideally Suited For

  • Server rooms and mid-sized data centers
  • Network components including critical routers and switches
  • Networks (LAN and WAN)
  • Industrial process and motion automation for mid-sized plants
  • Medical diagnostic/imaging equipment

Liebert NX UPS, 40-200kVA

The Liebert NX is a true on-line, double conversion, three-phase UPS system with Softscale™ technology that provides a scalable solution for growing data centers. The UPS allows growth from 40 to 60 to 80 kVA, and from 80 to 100 to 120 kVA. The UPS may also be paralleled for additional capacity or for redundant operation.

cf_discontinued

Liebert PSA UPS

cf_discontinued
Economical line-interactive UPS that offers full-featured power protection for small office computers and electronic equipment. Liebert PSA offers unique features and extraordinary performance not normally found in similar products in this price range. ​​​​​​​​​

Liebert PSA4 UPS

The Liebert PSA4 is an economical line interactive UPS technology designed with the features you need and provides reliable power protection for home office network devices and personal entertainment equipment.

discontinued product

Liebert PSI

Liebert PSI is a compact, line-interactive UPS system with flexible design, incorporating buck/boost automatic voltage regulation technology.

Liebert PST4 UPS

The Liebert PST4 is an offline UPS designed to provide reliable power protection for desk top equipment home office computer and network, and home entertainment equipment.

discontinued product

Liebert UP Station D

cf_discontinued

The Liebert UPStation D provides continuous, conditioned power to microcomputers and other data processing equipment. Upon generation, AC power is clean and stable. However, during transmission, it may be subject to load variations or accidents which cause power problems like low voltage, voltage spikes, or complete power failure. These problems may interrupt computer operations, cause data loss, or even damage equipment.

The UPS provides protection from many of these disturbances. It smooths out voltage variations and, in the event of complete power failure, it supports equipment long enough for an orderly shutdown. These desktop and rackmount units are available in four ratings: 600, 900, 1400, and 2000 VA.

Normally, the UPS connects filtered AC utility input power to its AC outputs; but when the UPS senses a power failure, it sounds an alarm, tuns ON the battery lights, and provides AC power to equipment through a sealed, maintenance-free battery. Upon utility restoration, the UPS powers the equipment with filtered AC utility power, boosting it if necessary.

If a brownout occurs and AC power drops below acceptable levels, the UPS boosts voltage without battery drainage and maintains quality power indefinitely.

The UPS contains a counter which automatically initiates a 15-second battery test every 7 days and upon start-up. The UPS resets the counter after back-up operation, manual battery test, or if the UPS is switched OFF. The operator may perform a manual battery test by pressing the ALARM SILENCE button.

A control circuit monitors power input and battery condition and upon sensing a fault, sounds an alarm and flashes a visual indication of the UPS status. In addition, a communications port enables the UPS to inform a computer equipped with SiteNet software of the power failure. SiteNet automatically saves data and performs an orderly shutdown. Cables and software are available as optional computer/LAN Interface Kits.

Back to Top